A robot can build this $300,000 home in four months

Advertisement
A robot can build this $300,000 home in four months

3d printed house Branch Technology Curve Appeal Exterior Rendering 01

Branch Technology

A rendering of the Curve Appeal home.

Advertisement

Constructing a home by hand can be both expensive and time-consuming, especially when the home features a custom design. Some homebuilders have chosen to automate part of the construction process instead.

A new architectural startup called Branch Technology uses 3D-printing robots that can construct parts for homes.

The company will build a prototype of its first home, designed by architecture firm WATG, this year in Chattanooga, Tennessee. Branch's machines will print the walls, roof, and floor of the 1,0000-square-foot model over the span of a few months, and then a construction crew will assemble the components on-site.

The cost of the prototype (somewhere between $300,000 and $400,000) will be higher than what Branch eventually hopes to offer to customers. The project's larger goal is to push the boundaries of 3D printing in construction.

Advertisement

Take a look at the home, called Curve Appeal, below.

{{}}

Branch Technology will complete its prototype of a home using 3D printers in late fall at Chattanooga State Community College, the director of sales, David Fuehrer, told Business Insider.

Branch Technology will complete its prototype of a home using 3D printers in late fall at Chattanooga State Community College, the director of sales, David Fuehrer, told Business Insider.

In 2016, Chicago-based WATG won Branch's Freeform Home Design Challenge, a competition to imagine the future of 3D-printed home construction.

Curve Appeal will span 1,000 square feet, and will feature a bedroom, bathroom, and living room.

Curve Appeal will span 1,000 square feet, and will feature a bedroom, bathroom, and living room.

From start to finish, the construction process will take three to four months.

Advertisement

To build it, Branch's system will first turn WATG’s design into code that the 3D printers can read.

To build it, Branch's system will first turn WATG’s design into code that the 3D printers can read.

Unlike traditional 3D printers that build layer-by-layer, Branch’s machines will create lattices, which they will then fill with thousands of pounds of liquid foam and concrete that hardens.

Unlike traditional 3D printers that build layer-by-layer, Branch’s machines will create lattices, which they will then fill with thousands of pounds of liquid foam and concrete that hardens.
Advertisement

Inside Branch's 40,000-square-foot facility, four bots will create the panels that will eventually be fastened together.

Inside Branch's 40,000-square-foot facility, four bots will create the panels that will eventually be fastened together.

Fuehrer said Branch’s method will make homes that are three to four times stronger than typical wood construction.

Fuehrer said Branch’s method will make homes that are three to four times stronger than typical wood construction.
Advertisement

The construction process will also produce less waste than traditional homebuilding, because the machines will print only the necessary parts, he said.

The construction process will also produce less waste than traditional homebuilding, because the machines will print only the necessary parts, he said.

The home’s parts will then be shipped on-site, and in under three weeks, a construction crew will assemble the structure. Lastly, the team will add finishing touches, like plumbing and appliances.

The home’s parts will then be shipped on-site, and in under three weeks, a construction crew will assemble the structure. Lastly, the team will add finishing touches, like plumbing and appliances.
Advertisement

Branch estimates that the prototype will cost $300 to $400 per square foot to build, but plans to get that price down before it starts selling homes.

Branch estimates that the prototype will cost $300 to $400 per square foot to build, but plans to get that price down before it starts selling homes.

According to Fuehrer, this figure is still lower than what it would cost to fabricate the same home by hand, which he estimates would cost anywhere from $800 to $1,400 per square foot because it would require skilled laborers.

Once complete, Branch will gift the home to the college, which will use it for classes.

Once complete, Branch will gift the home to the college, which will use it for classes.
Advertisement

The company believes that 3D printing represents the future of housing construction, because the process is extremely efficient.

The company believes that 3D printing represents the future of housing construction, because the process is extremely efficient.

Fuehrer added that 3D printers could be especially useful for building extraterrestrial colonies. In 2017, NASA awarded Branch Technology $85,930 to develop methods for constructing habitats on Mars.

Fuehrer added that 3D printers could be especially useful for building extraterrestrial colonies. In 2017, NASA awarded Branch Technology $85,930 to develop methods for constructing habitats on Mars.
Advertisement

On Earth, the team eventually plans to start selling custom homes and commercial buildings, but it does not have an exact timeline yet.

On Earth, the team eventually plans to start selling custom homes and commercial buildings, but it does not have an exact timeline yet.

"We want to push the envelope of what’s possible with 3D printing," Fuehrer said.

"We want to push the envelope of what’s possible with 3D printing," Fuehrer said.
Advertisement
Next StoryThe world faces a future of floods, famine, and extreme heat - here's how we survive